soldr.ai

Docs  /  Components

Waveshare IMX219-77IR camera: specs

8 megapixel IMX219 camera module from Waveshare with a 77-class lens and night-vision support, for Jetson Nano and Raspberry Pi CSI ports.

Every value cites its sourcePinout not published

Buy on Compoden

Specs

SpecValueSource
SensorIMX219, 8 megapixels, resolution 3280 x 2464source
Waveshare wiki, IMX219-77IR Camera, Parameter
CMOS size1/4 inchsource
Waveshare wiki, IMX219-77IR Camera, Parameter
LensFocal length 2.85 mm, aperture F2.0, diagonal field of view 79.3 deg, distortion under 1%source
Waveshare wiki, IMX219-77IR Camera, Parameter
Lens size6.5 mm x 6.5 mm; four screw holes in fixed positionssource
Waveshare wiki, IMX219-77IR Camera, Parameter
SupplySupports 3.3 V external power supplysource
Waveshare wiki, IMX219-77IR Camera, Parameter
Dimensions25 mm x 24 mmsource
Waveshare wiki, IMX219-77IR Camera, Parameter
InterfaceCSI camera connector; compatible with Jetson Nano; night vision supportedsource
Waveshare wiki, IMX219-77IR Camera, Introduction; Onboard Interfaces
Raspberry Pi 5 cableA Raspberry Pi 5 needs the supplied 22-pin cablesource
Waveshare wiki, IMX219-77IR Camera, Test with Compute Module

Power

ValueSource
Supply3.3 V external power supply supportedsource
Waveshare wiki, IMX219-77IR Camera, Parameter; no current figure given

Pinout

We don't publish a pin table for this part: no official source we could verify gives one. Check the labels printed on your module, and see the notes below.

The wiki gives no connector pin table.

Build with it

Project ideas for the Waveshare IMX219-77IR camera. Each link opens Soldr with the prompt filled in; Soldr assigns the pins, checks power and shows how to wire every part.

Common mistakes

Not covered by the official source

Sources