ESP32-CAM: specs
Camera board built around the ESP32 chip; the specs below come from the ESP32 chip datasheet only, not from the camera board.
Specs
| Spec | Value | Source |
|---|---|---|
| Processor | Dual-core, 2 cores at 240 MHz | source Features, CPU and Memory (CoreMark figures) |
| SRAM | 520 KB SRAM | source Features, CPU and Memory |
| Wi-Fi | 802.11 b/g/n | source Features, Wi-Fi |
| Bluetooth | Bluetooth v4.2 BR/EDR and Bluetooth LE | source Features, Bluetooth |
| Deep-sleep current | 10 µA (power consumption in Deep-sleep mode) | source Features, power modes |
| Operating voltage | 2.3 V to 3.6 V | source Power supply note (text) |
Power
| Value | Source | |
|---|---|---|
| Supply | Chip operating voltage 2.3 V to 3.6 V (chip only; board supply is not covered by an official source) | source Power supply note (text) |
Pinout
We don't publish a pin table for this part: no official source we could verify gives one. Check the labels printed on your module, and see the notes below.
Common mistakes
- Supplying more than 3.6 V to the ESP32 chip: the operating voltage is 2.3 V to 3.6 V (source)
- Using the chip datasheet pin table as the camera board pinout: that table lists chip pins, not the camera board header (source)
- Taking the 10 µA deep-sleep figure as the board standby current: that figure is the chip alone (source)
What we could not confirm
- No official ESP32-CAM pinout, schematic or camera (OV2640/OV3660) datasheet is in the local set. Camera, microSD and header pin map are omitted.
- Listing values for 8 MB PSRAM, 4 MB flash, 4 GB microSD limit and 500 mA supply are not confirmed by an official source and are not used.
- Listing's 'ESP32-S' chip name is not used; the local datasheet covers the ESP32 chip.
- Ambient temperature range and board current draw are not in the local chip text.
- no official board pinout; pinout withheld. The AI-Thinker ESP32-CAM spec/schematic is not in the local set; the ESP32 chip datasheet pin table lists chip pins, not the camera board header, camera or microSD connections.
Sources
- Espressif ESP32 Series Datasheet (official): link.
- The camera board is an AI-Thinker module. Its specification was not retrievable from the allowed sources.
Building with the ESP32-CAM? Describe your project on Soldr: it assigns pins from the board's published pinout, checks power and logic levels, and shows how to wire every part.