# MG996R servo: specs

> High-torque metal-gear hobby servo for angular positioning, controlled by a PWM signal; specs from the manufacturer's product page.

[HTML version](https://soldr.ai/docs/components/mg996r-servo)

[Docs](https://soldr.ai/docs) / [Components](https://soldr.ai/docs/components)

High-torque metal-gear hobby servo for angular positioning, controlled by a PWM signal; specs from the manufacturer's product page.

Every value cites its sourcePinout not published

[Buy on Compoden](https://compoden.com/products/mg996r-servo-high-torque-metal-gear-digital-servo)

## Specs

| Spec | Value | Source |
|---|---|---|
| Weight | 55 g | source Product page specification block |
| Dimensions | 40.7 x 19.7 x 42.9 mm | source Product page specification block |
| Stall torque at 4.8 V | 9.4 kg/cm | source Product page specification block |
| Stall torque at 6.0 V | 11 kg/cm | source Product page specification block |
| Operating speed at 4.8 V | 0.19 s/60 deg | source Product page specification block |
| Operating speed at 6.0 V | 0.15 s/60 deg | source Product page specification block |
| Operating voltage | 4.8 V to 6.6 V | source Product page specification block |
| Gear type | metal gear | source Product page specification block |
| Temperature range | 0 C to 55 C | source Product page specification block |
| Dead band width | 1 us | source Product page specification block |
| Current draw at idle | 10 mA | source Product page specification block |
| No-load operating current | 170 mA | source Product page specification block |
| Stall current | 1400 mA | source Product page specification block |

## Power

| | Value | Source |
|---|---|---|
| Supply | 4.8-6.6 V (product page) | source Product page specification block |
| Current | No-load 170 mA; stall 1400 mA (product page) | source Product page specification block |

## Pinout
We don't publish a pin table for this part: no official source we could verify gives one. Check the labels printed on your module, and see the notes below.

## Common mistakes

- Reading the 11 kg/cm torque as the 4.8 V figure: the page gives 9.4 kg/cm at 4.8 V and 11 kg/cm at 6.0 V ([source](https://towerpro.com.tw/product/mg996r/))
- Under-sizing the supply for stall: the page lists a 1400 mA stall current ([source](https://towerpro.com.tw/product/mg996r/))
- Running outside 0-55 C: the page gives the temperature range as 0-55 C ([source](https://towerpro.com.tw/product/mg996r/))

## What we could not confirm

- No official datasheet; specs come from the product page only.
- Rotation range (0-180 deg) and pulse width range are not on the product page.
- Stall torque at 4.8 V and 6 V, speed and weight are page values from the manufacturer's listing, not a PDF datasheet.
- Pinout withheld: the TowerPro MG996R page states no wire colours or pin order (it gives only a servo wire length of 32 cm), so no official pinout is available.
- Listing wording ('signal yellow/orange, power red, ground brown/black', power '5-6 V external') is convention and the listing's 4.8-7.2 V operating voltage and 10 kg-cm at 6 V differ from the TowerPro page (4.8-6.6 V, 11 kg/cm at 6 V); the page values are used.

## Sources

- TowerPro product page (no official PDF datasheet): [link](https://towerpro.com.tw/product/mg996r/)

Building with the MG996R servo? [Describe your project on Soldr](https://app.soldr.ai): it assigns pins from the board's published pinout, checks power and logic levels, and shows how to wire every part.